Garmin G1000 NXi Pilot's Manual page 405

While the Approaches Box is selected using the FMS Knob, the softkeys are blank. Once the desired chart
is selected, the chart scale can be changed and the chart page can be scrolled using the Joystick. Pressing the
Joystick centers the chart on the screen.
The aircraft symbol is shown on the chart only if the chart is to scale and the aircraft position is within the
boundaries of the chart. The aircraft symbol is not displayed when the Aircraft Not Shown Icon appears. If
the Chart Scale Box displays a banner NOT TO SCALE, the aircraft symbol is not shown. The Aircraft Not
Shown Icon may appear at certain times, even if the chart is displayed to scale.
Selecting the Chart Softkey switches between the ChartView diagram and the associated map in the WPT
page group. In the example shown, the Chart Softkey switches between the Gainesville, FL (KGNV) Airport
Diagram and the navigation map on the WPT – Airport Information page.
Selecting the Info 1 or Info 2 Softkey returns to the airport diagram when the view is on a different chart.
If the displayed chart is the airport diagram, the Info 1 or Info 2 Softkey has no effect. The aircraft position is
shown in magenta on the ChartView diagrams when the location of the aircraft is within the chart boundaries.
Another source for additional airport information is from the Info Box above the chart for certain airports.
This information source is not related to the Info 1 or Info 2 Softkey. When the Info Box is selected using the
FMS Knob, the softkeys are blank. The Charlotte, NC airport has five additional charts offering information;
the Airport Diagram, Take-off Minimums, Class B Airspace, Airline Parking Gate Coordinates, and Airline
Parking Gate Location. (The numbers in parentheses after the chart name are Jeppesen designators.)
190-02177-00 Rev. A
Figure 8-21 Airport Information Page, INFO View, Full Screen Width
Garmin G1000 NXi Pilot's Guide for Cessna NAV III
ADDITIONAL FEATURES
Aircraft
Current
Position
391