Garmin G1000 NXi Pilot's Manual page 46

SYSTEM OVERVIEW
Configure System
Time
Change Display
Unit Settings
Change audio
alert voice setting
DATE/TIME
The system obtains the current Universal Coordinated Time (UTC) date and time directly from the GPS
satellite signals (shown on the Aux - GPS Status Page). System time (displayed in the lower right corner of
the PFD) can be displayed in three formats: local 12-hr, local 24-hr, or UTC. Local time is set by adding/
subtracting an offset (hours:minutes) to/from UTC.
32
Figure 1-12 System Setup 1/2 Pages
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
Fields shown in Cyan may
be edited
Configure arrival alert settings
- Enable / disable alert
- Set arrival alert trigger distance
Restore System Defaults
Change settings for
Page Group Navigation
- FMS knob clicks to change
page group
- Page Group Window
seconds until timeout
Select System Setup Page
- Setup 1
- Setup 2
190-02177-00 Rev. A