Garmin G1000 NXi Pilot's Manual page 149

Setting up the 'Land', 'Aviation' or 'Airspace' group items:
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Settings' option.
2) Press the ENT Key. The Map Settings Menu is displayed.
3) Turn the small FMS Knob to select the desired group.
4) Press the ENT Key. The cursor flashes on the first field.
5) Turn the large FMS Knob to select the desired option.
6) Turn the small FMS Knob to select the desired setting (e.g. On/Off or maximum range).
7) Press the ENT Key to accept the selected option and move the cursor to the next item.
8) Repeat steps 5-7 as necessary.
9) Press the FMS Knob to return to the Navigation Map Page.
MAP DECLUTTER
The declutter feature allows the pilot to progressively step through four levels of removing map information.
The declutter level is displayed in the Detail Softkey and next to the Declutter Menu Option.
Decluttering the map:
Select the Detail Softkey with the Navigation Map Page displayed. The current declutter level is shown. With
each softkey selection, another level of map information is removed.
Or :
1) Press the MENU Key with the Navigation Map Page displayed.
2) Select 'Declutter'. The current declutter level is shown.
3) Press the ENT Key.
Decluttering the PFD Inset Map:
1) Press the Map/HSI Softkey.
2) Select the Detail Softkey. The current declutter level is shown. With each selection, another level of map
information is removed.
190-02177-00 Rev. A
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
FLIGHT MANAGEMENT
135