Ads-B System Status - Garmin G1000 NXi Pilot's Manual

ADS-B SYSTEM STATUS

The traffic mode is annunciated in the upper right corner of the Traffic Map Page.
ADS-B Mode
ADS-B System Test
Initiated
ADS-B Operating in
Airborne Mode
ADS-B Operating in
Surface Mode
ABS-B Traffic Off
ADS-B Traffic Not
Available
ADS-B Failed*
* See Table 6-28 for additional failure annunciations
If the optional TAS fails, the display of ADS-B traffic (ADS-B In) also fails, unless a GTX 345R
NOTE:
transponder is installed. In this case, if the TAS fails, the display of ADS-B traffic continues even if the TAS
has failed.
If the traffic unit fails, an annunciation as to the cause of the failure is shown in the center of the Traffic Map
Page. During a failure condition, the Operating Mode cannot be selected.
Traffic Map Page Center
Annunciation
NO DATA
DATA FAILED
FAILED
190-02177-00 Rev. A
Traffic Mode Annunciation
(Traffic Map Page)
ADS-B: TEST
ADS-B: AIRB
ADS-B: SURF
ADS-B: OFF
ADS-B: N/A
ADS-B: FAIL
Table 6-27 ADS-B Modes
Data is not being received from the traffic unit
Data is being received from the traffic unit, but the unit is self-reporting a failure
Incorrect data format received from the traffic unit
Table 6-28 Traffic Failure Annunciations
Garmin G1000 NXi Pilot's Guide for the Cessna Nav III
Traffic Map Page Center
Banner Annunciation
TEST MODE
None
None
ADS-B TRFC OFF
ADS-B TRFC N/A
ADS-B TRFC FAIL
Description
HAZARD AVOIDANCE
Traffic Display Status Icon
(Other Maps)
333