Garmin G1000 NXi Pilot's Manual page 403

TERMINAL PROCEDURES CHARTS
Selecting Terminal Procedures Charts:
While viewing the Navigation Map Page, Nearest Airport Page, or Flight Plan Page, select the Charts Softkey.
Or :
1) Press the MENU Key to display the Page Menu.
2) Turn the large FMS Knob to scroll through the Options Menu to Charts.
3) Press the ENT Key to display the chart.
Navigation Map Page Options Menu
On the Waypoint Airport Information Page Options Menu, select the desired chart and press the ENT Key
to display the chart.
When no terminal procedure chart is available, the banner CHART Not Available appears on the screen.
The CHART Not Available banner does not refer to the FliteCharts subscription, but rather the availability of
a particular airport chart selection or procedure for a selected airport.
If there is a problem in rendering the data (such as a data error or a failure of an individual chart), the
banner UNABLE TO DISPLAY CHART is then displayed.
When a chart is not available by selecting the Charts Softkey or selecting a Page Menu Option, charts may
be obtained for other airports from the WPT Pages or Flight Plan Pages.
190-02177-00 Rev. A
Waypoint Airport Information Page Options Menu
Figure 8-17 Option Menus
Figure 8-18 Chart Not Available Banner
Figure 8-19 Unable To Display Chart Banner
Garmin G1000 NXi Pilot's Guide for Cessna NAV III
ADDITIONAL FEATURES
389