Garmin G1000 NXi Pilot's Manual page 48

SYSTEM OVERVIEW
DISPLAY UNITS
Units in which various quantities are displayed on the system screens are listed on the System Setup Page.
The Navigation Angle reference, the Temperature units, and the Position units can be set from here.
Category
Navigation Angle
Distance and Speed
Altitude and Vertical
Speed
Temperature
Fuel and Fuel
Flow***
Weight**
Position
* Default setting
** Contact a Garmin-authorized service center to change this setting
*** Not configurable
Changing a display unit setting:
1) While on the System Setup 1 Page, press the FMS Knob momentarily to activate the flashing cursor.
2) Turn the large FMS Knob to highlight the desired field in the Display Units Box.
3) Turn the small FMS Knob to select the desired units.
4) Press the ENT Key. Press the CLR Key to cancel the action without changing the units.
34
Settings Affected Quantities
Magnetic (North)* Heading
True (North) Course
Bearing
Track
Desired Track
Wind direction (Trip Planning Page)
Metric Crosstrack error (HSI)
Nautical* Bearing distances (information windows)
DME distance (information window)
Flight plan distances
Map ranges
DIS, GS, TAS, XTK fields (Navigation Data Bar)
All distances on MFD
Altitude buffer distance (System Setup)
Arrival Alert trigger distance (System Setup)
All speeds on MFD
Feet* All altitudes on MFD
Meters All elevations on MFD
Celsius* All temperatures on PFD
Fahrenheit Total Air Temperature (Trip Planning Page)
Pounds Fuel parameters (Trip Planning Page)
Pounds* N/A
Kilograms
HDDD°MM.MM'* All positions
HDDD°MM'SS.S"
MGRS 1m
MGRS 10m
Table 1-6 Display Units Settings (System Setup Page)
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
Exceptions
Airspeed Indicator
True Airspeed (PFD)
Wind speed vector
Map range (Traffic Page, Terrain
Proximity/TAWS Page)
CDI scaling (System Setup)
Fuel range calculation (EIS)
Altimeter
Vertical Speed Indicator
VNV altitudes (Active Flight Plan)
Engine Indication System (EIS)
Engine Indication System (EIS)
N/A
N/A
190-02177-00 Rev. A