Garmin G1000 NXi Pilot's Manual page 38

SYSTEM OVERVIEW
Level 1 Level 2
DME
Bearing 1
Bearing 2
ALT Units
STD Baro
OBS
CDI
DME
XPDR
Standby
On
ALT
VFR
Code
Ident
Ident
Tmr/Ref
Nearest
24
Level 3 Level 4 Description
Option 2 Wind direction arrow and speed.
Option 3
Wind direction arrow with direction and speed.
Displays DME Information Window (optional).
Cycles the Bearing 1 Information Window through NAV1, NAV2, GPS/
waypoint identifier and GPS-derived distance information, ADF/frequency,
and Off.
Cycles the Bearing 2 Information Window through NAV1, NAV2, GPS/
waypoint identifier and GPS-derived distance information, ADF/frequency, and
Off.
Displays softkeys to select altitude unit parameters.
Meters
When enabled, displays altimeter in meters.
IN Press to display the BARO setting as inches of mercury.
HPA
Press to display the BARO setting as hectopacals.
Sets barometric pressure to 29.92 in Hg (1013 hPa if metric units are
selected).
Selects OBS mode on the CDI when navigating by GPS (only available with
active leg). When OBS is on, the softkey annunciator is green.
Cycles through FMS, NAV1, and NAV2 navigation modes on the CDI.
Displays the DME Tuning Window, allowing tuning and selection of the
DME (optional).
Displays the transponder selection softkeys.
Selects transponder Standby Mode (transponder does not reply to any
interrogations).
Activates transponder (transponder replies to identification interrogations).
Altitude Reporting Mode (transponder replies to identification and altitude
interrogations).
Automatically enters the VFR code (1200 in the U.S.A. only).
Displays transponder code selection softkeys 0-7.
0 - 7
Use numbers to enter code.
Ident Activates the Special Position Identification (SPI) pulse for 18 seconds,
identifying the transponder return on the ATC screen.
BKSP
Removes numbers entered, one at a time.
Activates the Special Position Identification (SPI) pulse for 18 seconds,
identifying the transponder return on the ATC screen.
Activates the Special Position Identification (SPI) pulse for 18 seconds,
identifying the transponder return on the ATC screen.
Displays Timer/References Window.
Displays Nearest Airports Window.
Table 1-3 PFD Softkeys
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
190-02177-00 Rev. A