Garmin G1000 NXi Pilot's Manual page 49

ARRIVAL ALERTS
The Arrival Alert Box on the System Setup 1 Page allows the Alerts Window arrival alerts to be turned 'On/
Off' and the alert trigger distance (up to 99.9 units) set for alerts in the Alerts Window and the PFD Navigation
Status Box. An arrival alert can be set to notify the pilot with a message upon reaching a user-specified
distance from the final destination (the direct-to waypoint or the last waypoint in a flight plan). When
Arrival Alerts is set to 'On', and the set distance is reached, an "Arrival at waypoint" message is displayed in
the PFD Navigation Status Box, and a "WPT ARRIVAL - Arriving at waypoint - [xxxx]" is displayed in the
Alerts Window. When Arrival Alerts is set to 'Off', only the PFD Navigation Status Box message "Arriving at
waypoint" is displayed, and it is displayed when the time to the final destination is approximately ten seconds.
Enabling/disabling the Alerts Window arrival alert:
1) Use the FMS Knob to select the Aux - System Setup 1 Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to select the 'On/Off' field in the Arrival Alert Box.
4) Turn the small FMS Knob clockwise to turn the airspace alert On or counterclockwise to turn the alert Off.
Changing the arrival alert trigger distance:
1) Use the FMS Knob to select the Aux - System Setup 1 Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the distance field in the Arrival Alert Box.
4) Use the FMS Knob to enter a trigger distance and press the ENT Key.
190-02177-00 Rev. A
Figure 1-15 Arrival Alert Settings (System Setup 1 Page)
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
SYSTEM OVERVIEW
35