FLIGHT INSTRUMENTS
Setting the Minimum Descent Altitude/Decision Height and bug:
1) Press the Tmr/Ref Softkey.
2) Turn the large FMS Knob to highlight the MINS field.
3) Turn the small FMS Knob to select BARO or TEMP COMP. OFF is selected by default. Press the ENT Key or turn
the large FMS Knob to highlight the next field.
4) Use the small FMS Knob to enter the desired altitude (from zero to 16,000 feet).
5) If TEMP COMP was selected, press the ENT Key or turn the large FMS Knob to highlight the next field and then
enter the temperature (-59˚C to 59˚C)
6) To remove the window, press the CLR Key or the Tmr/Ref Softkey.
68
Figure 2-35 BARO and TEMP COMP MDA/DH
Garmin G1000 NXi Pilot's Guide for the Cessna Nav III
190-02177-00 Rev. A