Garmin G1000 NXi Pilot's Manual page 144

FLIGHT MANAGEMENT
Displaying/removing topographic data on the PFD Inset Map:
1) Select the Map/HSI Softkey .
2) Select the Topo Softkey.
3) Select the Topo Softkey again to remove topographic data from the PFD Inset Map. When topographic data is
removed from the PFD Map, all navigation data is presented on a black background.
Displaying/removing topographic data using the Navigation Map Page Menu:
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Settings' option.
2) Press the ENT Key. The Map Settings Menu is displayed.
3) Select the 'Map' group.
4) Press the ENT Key.
5) Highlight the 'Terrain Display' field.
6) Select 'Topo' or 'Off'.
7) Press the FMS Knob to return to the Navigation Map Page.
The topographic data range is the maximum map range on which topographic data is displayed.
Since the PFD Inset Map is much smaller than the MFD navigation maps, items are removed on the
NOTE:
PFD Inset Map two range levels smaller than the range selected in the Map Settings pages (e.g., a setting
of 100 nm removes the item at ranges above 100 nm on MFD navigation maps, while the PFD Inset Map
removes the same item at 50 nm).
Selecting a topographical data range (Terrain Display):
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Settings' option.
2) Press the ENT Key. The Map Settings Menu is displayed.
3) Select the 'Map' group.
4) Press the ENT Key.
130
Absolute Terrain On
Terrain Off
Figure 5-13 PFD Inset Map - Absolute Terrain Data
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
190-02177-00 Rev. A