Garmin G1000 NXi Pilot's Manual page 53

The system records the time at which departure occurs, depending on whether the pilot prefers the time
to be recorded from system power-up or from aircraft lift off. The displayed departure time can also be reset
to display the current time at the point of reset. The format in which the time is displayed is controlled from
the System Setup Page.
Setting the departure timer starting criterion:
1) Use the FMS Knob to select the Aux - Utility Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the field next to the departure time.
4) Turn the small FMS Knob to select the starting criterion (Pwr-On or In-Air) and pr ess the ENT Key.
Resetting the departure time:
1) Use the FMS Knob to select the Aux - Utility Page.
2) Press the MENU Key.
3) Use the FMS Knob to highlight 'Reset Departure Time' and press the ENT Key.
TRIP STATISTICS
The odometer and trip odometer record the total mileage traveled from the last reset; these odometers can
be reset independently. Resetting the trip odometer also resets the average trip groundspeed. Maximum
groundspeed for the period of time since the last reset is also displayed.
Resetting trip statistics readouts:
1) Use the FMS Knob to select the Aux - Utility Page.
2) Press the MENU Key. The following reset options for trip statistics are displayed:
• Reset Trip ODOM/AVG GS—Resets trip average ground speed readout and odometer
• Reset Odometer—Resets odometer readout only
• Reset Maximum Speed—Resets maximum speed readout only
• Reset All—Resets flight timer, departure timer, odometers, and groundspeed readouts
3) Use the FMS Knob to highlight the desired reset option and press the ENT Key. The selected parameters are
reset to zero and begin to display data from the point of reset.
190-02177-00 Rev. A
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
SYSTEM OVERVIEW
39