Topography - Garmin G1000 NXi Pilot's Manual

TOPOGRAPHY

All navigation maps can display various shades of topography colors representing land elevation, similar to
aviation sectional charts. Topographic data can be displayed or removed as described in the following procedures.
Topographic data can also be displayed on the selectable profile map at the bottom of the Navigation Map Page.
Displaying/removing topographic data on all MFD pages displaying navigation maps:
1) Select the Map Opt Softkey.
2) Select the TER Softkey until 'Topo' is shown on the softkey to display topographic data.
3) Select the TER Softkey until 'Off' is shown on the softkey to remove topographic data from the navigation map.
When topographic data is removed from the page, all navigation data is presented on a black background.
190-02177-00 Rev. A
TOPO Off
Figure 5-12 Navigation Map - Topographic Data
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
Navigation Map
Topographic Data
Navigation Map
Black Background
Topographic Data
on Profile Map
FLIGHT MANAGEMENT
TOPO On
129