Garmin G1000 NXi Pilot's Manual page 152

FLIGHT MANAGEMENT
Displaying/removing airways:
1) Select the Map Opt Softkey.
2) Select the AWY Softkey. Both High and Low Altitude Airways are displayed (AWY On).
3) Select the softkey again to display Low Altitude Airways only (AWY LO).
4) Select the softkey again to display High Altitude Airways only (AWY HI).
5) Select the softkey again to remove High Altitude Airways. No airways are displayed (AWY Off).
Or:
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Settings' option.
2) Press the ENT Key. The Map Settings Menu is displayed.
3) Turn the small FMS Knob to select the 'Airways' group, and press the ENT Key.
4) Turn the large FMS Knob to highlight the desired ALT Airways 'On/Off' field.
5) Turn the FMS Knob to select 'Off' or 'On'.
6) Press the FMS Knob to return to the Navigation Map Page.
The airway range is the maximum map range on which airways are displayed.
Selecting an airway range (Low ALT Airways or High ALT Airways):
1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the 'Map Settings' option.
2) Press the ENT Key. The Map Settings Menu is displayed.
3) Turn the small FMS Knob to select the 'Airways' group, and press the ENT Key.
4) Highlight the 'Low ALT Airways' or 'High ALT Airways' range field.
5) To change the range setting, turn the small FMS Knob to display the range list.
6) Select the desired range using the small FMS Knob.
7) Press the ENT Key.
8) Press the FMS Knob to return to the Navigation Map Page.
The following items are configured on the airways menu:
Airways Symbols
Low Altitude Airways (V Routes and T Routes)
High Altitude Airways (J Routes and Q Routes)
138
Table 5-5 Airways Symbol Information
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
Default
Symbol
Range (nm)
50
50
Maximum
Range (nm)
100
100
190-02177-00 Rev. A