Garmin G1000 NXi Pilot's Manual page 342

HAZARD AVOIDANCE
Traffic Display
Range Rings
Enabling/disabling the display of ADS-B traffic:
1) Select the Traffic Map Page.
2) Select the ADS-B Softkey.
Or :
a) Press the MENU Key and turn the small FMS Knob to highlight 'ADS-B On' or 'ADS-B Off'.
b) Press the ENT Key.
Testing the display of ADS-B traffic:
1) Select the Traffic Map Page.
2) If necessary, turn the Joystick to select a map range of 2 and 6 nm to ensure full test pattern display.
3) Ensure the ADS-B Softkey is disabled.
4) If the optional TAS is installed, ensure the TAS STBY Softkey is enabled.
5) Press the Test Softkey.
Or :
a) Press the MENU Key.
b) Turn the small FMS Knob to highlight 'Test Mode'.
c) Press the ENT Key.
328
Figure 6-75 Traffic Map Page
Garmin G1000 NXi Pilot's Guide for the Cessna Nav III
AIRB Application On
Other Non-Threat
Traffic, 1000 below,
climbing
Traffic Advisory,
200' above,
climbing
No-bearing
Traffic Advisory,
4.0 nm away,
1100' above,
descending
Proximity
Advisory, 1200'
feet below,
descending
190-02177-00 Rev. A