Auxiliary Video (Optional); Video Setup - Garmin G1000 NXi Pilot's Manual

8.8 AUXILIARY VIDEO (OPTIONAL)

The system provides a control and display interface to an optional auxiliary video system. The system can
display video for up to two inputs.
There are four modes of operation of the auxiliary video display: Full-Screen, Full-Screen with Digital Zoom,
Split-Screen with Map, and Split-Screen with Map and Digital Zoom.
Displaying auxiliary video:
1) Turn the large FMS Knob to select the Aux page group.
2) Turn the small FMS Knob to select Video and display the Aux-Video Page.
Control of the Aux - Video Page can also be accessed through the Page Menu.
Selecting video menu options:
1) While viewing the Aux - Video Page press the MENU Key to display the Page Menu Options.
2) Turn the large FMS Knob to highlight the desired video adjustment option and press the ENT Key.
Once the ENT key is pressed on any option, the page menu closes and returns to the Aux - Video Page.

VIDEO SETUP

Video brightness, contrast, and saturation may be adjusted be selecting the setup function. While viewing
the setup function softkeys, after 45 seconds of softkey inactivity, the system reverts to the Aux - Video Page
softkeys.
Adjusting the video settings:
1) With the Aux-Video Page displayed, press the Setup Softkey.
2) Press the Bright - or Bright +, to adjust display brightness in five percent increments from 0 to 100%.
3) Press the Contrast- or Contrast +, to adjust display contrast in five percent increments from 0 to 100%.
4) Press the SAT - or SAT +, to adjust display saturation in five percent increments from 0 to 100%.
5) If desired, return the display to the default settings by pressing the Reset Softkey.
6) Press the BACK Softkey to return to the previous softkey level.
190-02177-00 Rev. A
Garmin G1000 NXi Pilot's Guide for Cessna NAV III
ADDITIONAL FEATURES
413