Garmin G1000 NXi Pilot's Manual page 19

1 NAV VOL/ID Knob
2 NAV Frequency Trans-
fer Key
3
NAV Knob
4
*Heading Knob
5
Joystick
6 CRS/BARO Knob
7
COM Knob
8
COM Frequency
Transfer Key (EMERG)
9
COM VOL/SQ Knob
10
Direct-to Key (
11
FPL Key
12
CLR Key
(DFLT MAP)
13
MENU Key
14
PROC Key
15
ENT Key
190-02177-00 Rev. A
Turn to control NAV audio volume (shown in the NAV Frequency Box as a percentage)
Press to toggle Morse code identifier audio ON/OFF
Transfers the standby and active NAV frequencies
Turn to tune NAV receiver standby frequencies (large knob for MHz; small for kHz)
Press to toggle cyan tuning box between NAV1 and NAV2
Turn to manually select a heading. When operating in Heading Select mode, this knob pro-
vides the heading reference to the flight director.
Press to display a digital heading momentarily to the left of the HSI and synchronize the Se-
lected Heading to the current heading
Turn to change map range
Press to activate Map Pointer for map panning
Turn large knob for altimeter barometric pressure setting
Turn the small knob to set the pilot-selected course on the HSI when the VOR1, VOR2, or
OBS/SUSP mode is selected. Pressing this knob centers the CDI on the currently selected
VOR. The pilot-selected course provides course reference to the pilot-side flight director
when operating in Navigation and Approach modes.
Press to re-center the CDI and return course pointer directly TO bearing of active waypoint/
station
Turn to tune COM transceiver standby frequencies (large knob for MHz; small for kHz)
Press to toggle cyan tuning box between COM1 and COM2
The selected COM (green) is controlled with the COM MIC Key (Audio Panel).
Transfers the standby and active COM frequencies
Press and hold two seconds to tune the emergency frequency (121.5 MHz) automatically into
the active frequency field
Turn to control COM audio volume level (shown as a percentage in the COM Frequency Box)
Press to turn the COM automatic squelch ON/OFF
Activates the direct-to function and allows the user to enter a destination waypoint and es-
)
tablish a direct course to the selected destination (specified by identifier, chosen from the
active route)
Displays flight plan information
Erases information, cancels entries, or removes menus
Press and hold to display the MFD Navigation Map Page (MFD only).
Displays a context-sensitive list of options for accessing additional features or making setting
changes
Gives access to IFR departure procedures (DPs), arrival procedures (STARs), and approach
procedures (IAPs) for a flight plan or selected airport
Validates/confirms menu selection or data entry
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
SYSTEM OVERVIEW
5