Garmin G1000 NXi Pilot's Manual page 231

Loading a procedure into the active flight plan from the <Procedure> Information Page:
1) From the Airport Information Page (first page in the WPT group):
Select the DP Softkey. The Departure Information Page is displayed, defaulting to the airport displayed on the
Airport information Page.
Or .
Select the STAR Softkey. The Arrival Information Page is displayed, defaulting to the airport displayed on the
Airport information Page.
Or .
Select the APR Softkey. The Approach Information Page is displayed, defaulting to the airport displayed on the
Airport information Page.
2) To select another airport, press the FMS Knob to activate the cursor, enter an identifier/facility name/city, and
press the ENT Key.
3) Select a different procedure, if desired.
a) Turn the large FMS Knob to highlight the procedure. The procedure is previewed on the map.
b) Turn the small FMS Knob to view the available procedures. Press the ENT Key to select the procedure. The
cursor moves to the next box (runway or transition). The procedure is previewed on the map.
c) Turn the small FMS Knob to view the available runway or transition. Press the ENT Key to select the
runway or transition. The cursor moves to the next box (if available). The procedure is previewed on the
map.
d) Turn the small FMS Knob to view the available transitions. Press the ENT Key to select the transition. The
cursor moves to the Sequence box or the Minimums box. The procedure is previewed on the map.
4) Press the MENU Key to display the <Procedure> Information Page Menu.
5) Turn the FMS Knob to highlight 'Load <procedure>'.
6) Press the ENT Key to load the procedure into the active flight plan.
190-02177-00 Rev. A
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
FLIGHT MANAGEMENT
217