Garmin G1000 NXi Pilot's Manual page 450

APPENDIX B
UPDATING DATABASES USING FLIGHT STREAM 510
Updating Databases from any MFD page (except the Aux - Databases page):
1) Insert the Flight Stream Mutimedia Card in the bottom slot of the MFD.
2) Press the Update softkey when the Database Update screen appears.
3) The Flight Stream 510 will enter WI-FI mode. The following screen will appear.
4) Put the mobile device in WI-FI mode (refer to the Additional Features section).
5) Connect the mobile device to the Flight Stream 510 WI-FI (refer to the Additional Features section). The 'WI-FI
Not Connected' screen will close when the WI-FI connection is established.
6) When the transfer is complete, the following screen will appear.
7) Press the Close softkey.
8) When an existing database is expired and a new one is ready to become active, a 'Database Expired' window
will appear. Continue to the next step to restart the system.
436
Figure B-5 Database Update Available
Figure B-6 Starting Database Transfer
Figure B-7 Database Transfer Complete
Garmin G1000 NXi Pilot's Guide for the Cessna Nav III 190-02177-00 Rev. A