Garmin G1000 NXi Pilot's Manual page 259

NEXRAD
Weather Product
Selected for
Display
Viewing the Weather Data Link Page and changing the data link weather source, if applicable:
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Weather Data Link (XM or FIS-B) Page. The currently selected data link
weather source appears in the page title.
3) If the page title does not contain the desired weather source, press the MENU Key.
a) Turn the FMS Knob to highlight 'Display XM Weather', or 'Display FIS-B Weather' (choices may vary
depending on the installed equipment).
b) Press the ENT Key.
The system presents the softkeys for the selected source on the Weather Data Link Page, and for map overlays
used throughout the system. The following figures show the softkeys for the Weather Data Link Page based on
the selected source.
190-02177-00 Rev. A
Figure 6-2 Weather Data Link (XM) Page
Figure 6-3 Changing the Data Link Weather Source
Garmin G1000 NXi Pilot's Guide for the Cessna Nav III
HAZARD AVOIDANCE
NEXRAD Weather
Product Display
Enabled Icon
NEXRAD Weather
Product Age (US)
245