Garmin G1000 NXi Pilot's Manual page 303

3) Turn the FMS Knob to select the 'Weather' group and press the ENT Key.
4) Turn the large FMS Knob to select the Stormscope Mode field.
5) Turn the small FMS Knob to change between 'Cell' and 'Strike' options. When the desired item is selected, press
the ENT Key.
6) Press the FMS knob to return to the Navigation Map Page.
If heading input is lost, strikes and/or cells must be cleared manually after the execution of each turn. This
is to ensure that the strike and/or cell positions are depicted accurately in relation to the nose of the aircraft.
Manually clearing Stormscope data on the Navigation Map:
1) Press the MENU Key.
2) Turn the FMS Knob to highlight 'Clear Stormscope
3) Press the ENT Key.
Selecting a Stormscope range on the Navigation Map:
1) Press the MENU Key.
2) With 'Map Settings' highlighted, press the ENT Key.
3) Turn the FMS Knob to highlight the select the 'Weather' group, and press the ENT Key.
4) Turn the large FMS Knob to highlight the Stormscope maximum map display range distance.
5) Turn the small FMS Knob to select the Stormscope maximum map display range distance.
6) Press the ENT Key.
7) Press the FMS Knob to return to the Navigation Map Page.
To change the display range on the Navigation Map Page, turn the Joystick clockwise to increase the map
range or counter-clockwise to decrease the map range.
190-02177-00 Rev. A
Figure 6-52 Navigation Map Page with Stormscope Lightning Data
Garmin G1000 NXi Pilot's Guide for the Cessna Nav III
Stormscope Navigation Map
Overlay Enabled Icon
Lightning'.
®
HAZARD AVOIDANCE
Stormscope Mode
Lightning Strike
Rate Per Minute
289