System Status - Garmin G1000 NXi Pilot's Manual

SYSTEM STATUS

The System Status Page displays the status and software version numbers for all detected system LRUs.
Pertinent information on all system databases is also displayed. Active LRUs are indicated by green check marks
and failed LRUs are indicated by red "X"s. Failed LRUs should be noted and a service center or Garmin dealer
informed.
The LRU and ARFRM Softkeys on the System Status Page select the applicable list (LRU Information or
Airframe window) through which the FMS Knob can be used to scroll information within the selected window.
Pressing the MFD1 DB Softkey (label annunciator turns green indicting the softkey is selected) places the
cursor in the database window. Use the FMS Knob to scroll through database information for the MFD.
Pressing the softkey again will change the softkey label to PFD1 DB. PFD 1 database information is now
displayed in the database window. Pressing the softkey a third time will change the softkey label back to MFD1
DB. MFD database information is displayed again in the database window.
The ANN Test Softkey, when selected, causes an annunciation test tone to be played.
190-02177-00 Rev. A
Figure 1-6 Example System Status Page
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
SYSTEM OVERVIEW
13