Airports - Garmin G1000 NXi Pilot's Manual

FLIGHT MANAGEMENT
If duplicate entries exist for the entered facility name or location, additional entries may be viewed by continuing
to turn the small FMS Knob during the selection process. If duplicate entries exist for an identifier, a Duplicate
Waypoints Window is displayed when the ENT Key is pressed.
Identifier with
Duplicates
Duplicate Message

AIRPORTS

'North Up' orientation on the Airport Information Page cannot be changed; the pilot needs to be
NOTE:
aware of proper orientation if the Navigation Map orientation is different from the Airport Information Page
Map.
The Airport Information Page is the first page in WPT group and allows the pilot to view airport information,
load frequencies (COM, NAV, and lighting), review runways, and review instrument procedures that may be
involved in the flight plan. See the Audio Panel and CNS Section for more information on loading frequencies
(auto-tuning). After engine startup, the Airport Information Page defaults to the airport where the aircraft is
located. After a flight plan has been loaded, it defaults to the destination airport. On a flight plan with multiple
airports, it defaults to the airport which is the current active waypoint.
146
Figure 5-25 Waypoint Information Window - Duplicate Identifier
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
Duplicate
Waypoints
190-02177-00 Rev. A