Garmin G1000 NXi Pilot's Manual page 284

HAZARD AVOIDANCE
The system also shows METAR flags and their associated text on the Active Flight Plan Page on the MF.D.
The system shows a METAR flag next to waypoints in the flight plan with an available METAR.
Displaying original METAR text on the Active Flight Plan Page:
1) Select the Active Flight Plan Page on the MFD.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight a waypoint with an available METAR (indicated with a METAR flag next
to it). The METAR text will appear in the 'Selected Waypoint Weather' Window below.
4) When finished, press the FMS Knob to remove the cursor or press the FPL Key to exit the Active Flight Plan
Page.
Original METAR text is also accessible on navigation maps displaying METAR flags. When the map pointer
is panned over a METAR flag, the METAR text is shown in a box near the flag.
Displaying original METAR text information on the PFD Inset Map:
1) On the PFD, press the Map/HSI Softkey.
2) Press the METAR Softkey.
3) Press the Joystick and pan to the desired METAR flag. Original METAR text appears on the map.
4) When finished, press the Joystick to remove the Map Pointer.
SURFACE ANALYSIS AND CITY FORECAST (SIRIUSXM)
Surface Analysis and City Forecast information is available for current and forecast weather conditions.
Forecasts are available for intervals of 12, 24, 36, and 48 hours.
270
Figure 6-30 Current Surface Analysis Data
Garmin G1000 NXi Pilot's Guide for the Cessna Nav III 190-02177-00 Rev. A