Garmin G1000 NXi Pilot's Manual page 333

• Below
• Unrestricted
3) Select the ENT Softkey.
T M
raffIC aP
The display range on the Traffic Map Page can be changed at any time. Map range is adjustable with the
Joystick, and rings on the map denote the ranges.
Changing the display range on the Traffic Map Page:
1) Turn the Joystick.
2) The following range options are available:
• 750 ft (with optional ADS-B)
• 750 ft and 1500 ft (with optional ADS-B)
1500 ft and 0.5 nm (with optional ADS-B)
•
• 0.5 nm and 1 nm (with optional ADS-B)
• 1 nm and 2 nm (with optional ADS-B)
• 2 nm
2 and 6 nm
•
• 6 and 12 nm
• 12 and 24 nm
• 24 and 40 nm (available with ADS-B or KTA 870)
ADDITIONAL TRAFFIC DISPLAYS
The Map - Traffic Map Page is the principal map page for viewing traffic information. Traffic information
can also be displayed on the following other maps for additional reference on the MFD when the traffic unit
is operating:
• Navigation Map Page
• Traffic Map Page
• Trip Planning Page
Enabling/disabling traffic information (MFD maps other than the Traffic Map Page):
1) Select the Map Opt Softkey.
2) Select the Traffic Softkey. Traffic is now displayed on the map.
When traffic is selected on maps other than the Traffic Map Page, the system shows a traffic status icon
to indicate traffic is enabled for display as well as the altitude display mode (Above, Below, Normal, Unres).
190-02177-00 Rev. A
P D r
age ISPlay ange
Garmin G1000 NXi Pilot's Guide for the Cessna Nav III
HAZARD AVOIDANCE
• Nearest Pages
• Active Flight Plan Page
• Aux Video Page
319