Final Configuration And Setup Items; Optional System Activation - Garmin G1000 Manual

Columbia 350/400 v8.xx software loading and post installation checkout

Hide thumbs Also See for G1000:

Table of Contents

GEA1

GDC1

3. De-activate the cursor.

If any software version and/or part number does not match those specified by the

Required Equipment List, or if the software is not successfully loaded, DO NOT continue

with post-installation procedures. Troubleshoot and resolve the issue before continuing.

2.7 Final Configuration and Setup Items

This section describes the steps that must be completed in order to configure the G1000 for optional

systems. Only those systems that are installed must be configured.

If the configuration for an optional system is inadvertently loaded for a system that is

NOT installed, the basic Columbia 400 or Columbia 350 configuration for GIA 2, GEA

1, GMA 1 and the Airframe must be reloaded. Following this, the configuration for the

optional systems must be repeated.

Page 2-12

Revision 1

___________

IMPORTANT

G1000 V8.XX S/W Load and Post Install Checkout – Columbia 350/400

GCU

GDC1 FPGA

___________

190-00577-04

Table of Contents