Svt Operation - Garmin G1000 NXi Pilot's Manual

SVT OPERATION

SVT is activated from the PFD using the softkeys located along the bottom edge of the display. Pressing the
softkeys turns the related function on or off. When SVT is enabled, the pitch attitude scale is reduced from 20
degrees up and down to 10 degrees up to 7.5 degrees down.
SVT functions are displayed on three levels of softkeys. The PFD Opt Softkey leads into the PFD function
Softkeys, including synthetic vision. Pressing the SVT Softkey displays the SVT feature softkeys. The softkeys
are labeled Pathways, Terrain, HDG LBL, and APT Sign. The Back Softkey returns to the previous level of
softkeys. Synthetic Terrain must be active before any other SVT feature may be activated.
Pathways, HDG LBL, and APT Sign Softkeys are only available when the Terrain Softkey is activated (gray
with black characters). After activating the Terrain Softkey, the Pathways, HDG LBL, and APT Sign softkeys
may be activated in any combination to display desired features. When system power is cycled, the last selected
state (on or off) of the Pathways, Terrain, HDG LBL, and APT Sign softkeys is remembered by the system.
• Pathways Softkey enables display of rectangular boxes that represent course guidance.
• Terrain Softkey enables synthetic terrain depiction.
• HDG LBL Softkey enables horizon heading marks and digits.
• APT Sign Softkey enables airport signposts.
190-02177-00 Rev. A
Figure 8-1 Synthetic Vision Imagery
Garmin G1000 NXi Pilot's Guide for Cessna NAV III
ADDITIONAL FEATURES
373