Garmin G1000 NXi Pilot's Manual page 263

installed, the system uses the same maximum map range for the comparable weather product of another
source.
Setting up and customizing the Weather Data Link Page:
1) Select the Weather Data Link Page.
2) Press the MENU Key.
3) Turn the FMS Knob to highlight 'Weather Setup', then press the ENT Key.
4) Turn the small FMS Knob to select 'Product Group 1' or 'Product Group 2', and press the ENT Key.
'Product Group 2' is not applicable to FIS-B Weather.
NOTE:
5) Turn the large FMS Knob or press the ENT Key to scroll through product selections.
6) Turn the small FMS Knob to scroll through options for each product (ON/OFF, range settings, etc.).
7) Press the ENT Key to select an option.
8) Press the FMS Knob or CLR Key to return to the Weather Data Link (XM) Page with the changed settings.
Restoring default Weather Data Link Page settings:
1) Select the Weather Data Link Page.
2) Press the MENU Key.
3) Turn the FMS Knob to highlight 'Weather Setup', then press the ENT Key.
4) Press the MENU Key.
5) Highlight the desired default(s) to restore (all or for selection) and press ENT Key.
6) When finished, press the FMS Knob or press the CLR Key.
190-02177-00 Rev. A Garmin G1000 NXi Pilot's Guide for the Cessna Nav III
HAZARD AVOIDANCE
249