Garmin G1000 NXi Pilot's Manual page 158

FLIGHT MANAGEMENT
Map panning on the IFR/VFR Charts works the same as on the Navigation Map. Map range selected on either
the Navigation Map or the IFR/VFR Charts applies to both. However, if the range selected on the Navigation
Map it is not a valid chart range, the chart is shown with a range of 7.5 nm.
Modifying the chart settings:
1) Press the MENU Key with the IFR Low / IFR High Chart displayed. The cursor flashes on the 'Settings' option.
2) Press the ENT Key. The cursor flashes on the 'Color Scheme' setting.
3) Turn the small FMS Knob to select 'Day', 'Auto', or 'Night'. The IFR Chart display changes to reflect the setting.
4) If 'Auto' was selected, turn the large FMS Knob to select the backlight threshold field (sets value for automatic
day/night switching).
Selecting the chart to display:
1) Press the MENU Key with the IFR/VFR Charts Page displayed.
2) Turn the FMS Knob to highlight the 'Display VFR' field, the 'Display IFR Low' field, or the 'Display IFR High' field.
3) Press the ENT Key. The selected chart is displayed.
144
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
190-02177-00 Rev. A