System Annunciations - Garmin G1000 NXi Pilot's Manual

SYSTEM ANNUNCIATIONS

Upon power-up, certain windows remain invalid as system equipment begins to initialize. All windows
NOTE:
should be operational within one minute of power-up. If any window continues to remain flagged, the
system should be serviced by a Garmin-authorized repair facility.
When an LRU or an LRU function fails, a large red 'X' is typically displayed on windows associated with the
failed data (refer to Table 1-1 for all possible flags and the responsible LRUs). Refer to the Pilot' s Operating
Handbook (POH) for additional information regarding pilot responses to these annunciations.
The status of detected LRUs can be checked on the Aux - System Status Page. Active LRUs are indicated by
green check marks; failed by red or amber 'X' s . Failed LRUs should be noted and a service center or Garmin-
authorized dealer informed.
Viewing LRU information:
1) Use the FMS Knob to select the Aux - System Status Page.
2) To place the cursor in the 'LRU Info' Box,
Press the LRU Softkey.
Or :
a) Press the MENU Key.
b) With 'Select LRU Window' highlighted, press the ENT Key.
3) Use the FMS Knob to scroll through the box to view LRU status information.
Refer to the POH for additional information regarding pilot responses to these annunciations.
NOTE:
190-02177-00 Rev. A
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
SYSTEM OVERVIEW
11