Garmin G1000 NXi Pilot's Manual page 50

SYSTEM OVERVIEW
PAGE NAVIGATION
The large FMS Knob displays the Page Group Tabs and navigates through the tabs. The small FMS Knob
navigates through the pages listed within a specific group. The number of clicks it takes to display the Page
Group Tabs and change to the next tab can be controlled from the Page Navigation box on the Aux - System
Setup 2 Page.
Off – Displays the Page Group Window with one click of either FMS Knob.
On – Displays the Page Group Window and navigates to the next page group with one click of either FMS Knob.
The pilot can select, from the Aux - System Setup 2 Page, the amount of time the Page Group Window is
displayed (in the lower right corner of the MFD). The timeout can range from two to ten seconds.
Selecting page navigation settings:
1) Use the FMS Knob to select the Aux - System Setup 2 Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the 'Change On 1st Click' field in the Page Navigation Box.
4) Turn the small FMS Knob to select 'Off' or 'On'.
5) Turn the large FMS Knob to highlight the 'Timeout Seconds' field in the Page Navigation Box.
6) Turn the small FMS Knob to select the desired number of seconds
7) Press the FMS Knob momentarily to remove the flashing cursor.
AUDIO ALERTS
The Audio Box on the System Setup 2 Page allows the audio alert voice setting (male or female).
Changing the audio alert voice:
1) Use the FMS Knob to select the Aux - System Setup 2 Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the voice field in the Audio Box.
4) Use the FMS Knob to select the desired voice setting and press the ENT Key.
36
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
190-02177-00 Rev. A