Garmin G1000 NXi Pilot's Manual page 189

Cessna nav iii
Hide thumbs Also See for G1000 NXi:
Table of Contents

Advertisement

Selecting a nearby airport as a direct-to destination:
1) Select the Nearest Softkey on the PFD; or turn the FMS Knob to display the Nearest Airports Page and press
the FMS Knob.
2) Select the desired airport (the nearest one is already selected).
3) Press the Direct-to Key.
4) Press the ENT Key. The cursor is now displayed on 'Activate?'.
5) Press the ENT Key again to activate the direct-to.
Direct-to destinations may also be selected by using the pointer on the navigation map pages. If no airport,
NAVAID, or user waypoint exists at the desired location, a temporary waypoint named 'MAPWPT' is automatically
created at the location of the map arrow.
Selecting a waypoint as a direct-to destination using the pointer:
1) From a navigation map page, push the Joystick to display the pointer.
2) Move the Joystick to place the pointer at the desired destination location.
3) If the pointer is placed on an existing airport, NAVAID, or user waypoint, the waypoint name is highlighted.
4) Press the Direct-to Key to display the Direct-to Window with the selected point entered as the direct-to
destination.
5) Press the ENT Key. The cursor is now displayed on 'Activate?'.
6) Press the ENT Key again to activate the direct-to.
Cancelling a Direct-to:
1) Press the Direct-to Key to display the Direct-to Window.
2) Press the MENU Key.
3) With 'Cancel Direct-To NAV' highlighted, press the ENT Key. If a flight plan is still active, the system resumes
navigating the flight plan along the closest leg.
When navigating a direct-to, the system sets a direct great circle course to the selected destination. The course
to a destination can also be manually selected using the course field ('Course') on the Direct-to Window.
Selecting a manual direct-to course:
1) Press the Direct-to Key. The Direct-to Window is displayed with the destination field highlighted.
2) Highlight the course field.
3) Enter the desired course.
4) Press the ENT Key. The cursor is now displayed on 'Activate?'.
5) Press the ENT Key again to activate the direct-to.
190-02177-00 Rev. A
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
FLIGHT MANAGEMENT
175

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents