Garmin G1000 NXi Pilot's Manual page 332

Cessna nav iii
Hide thumbs Also See for G1000 NXi:
Table of Contents

Advertisement

HAZARD AVOIDANCE
Traffic Display
Range Rings
a
D
lTITUDe
ISPlay
The pilot can select the volume of airspace in which Other Non-Threat and Proximity Advisory traffic is
displayed. If traffic meets the criteria for a TA, it is also displayed even if it is outside of the selected volume
of airspace.
Changing the altitude range:
1) On the Traffic Map Page, select the ALT Mode Softkey.
2) Select one of the following Softkeys:
Above: Displays Other Non-Threat and Proximity Advisory traffic from 9900 feet above the aircraft to 2700
feet below the aircraft. Typically used during climb phase of flight.
Normal: Displays Other Non-Threat and Proximity Advisory traffic from 2700 feet above the aircraft to
2700 feet below the aircraft. Typically used during enroute phase of flight.
Below: Displays Other Non-Threat and Proximity Advisory traffic from 2700 feet above the aircraft to 9900
feet below the aircraft. Typically used during descent phase of flight.
UNREST (unrestricted): All traffic is displayed from 9900 feet above and 9900 feet below the aircraft.
3) To return to the Traffic Page, select the Back Softkey.
Or :
1) Press the MENU Key.
2) Turn the small FMS Knob to select one of the following (see softkey description in the previous step 2):
Above
Normal
318
Figure 6-71 Traffic Map Page
M
oDe
Garmin G1000 NXi Pilot's Guide for the Cessna Nav III
TAS Operating Mode
Annunciation
Other Non-Threat
Traffic, 1000 below,
climbing
Traffic Advisory,
200' above,
climbing
No-bearing
Traffic Advisory,
4.0 nm away,
1100' above,
descending
Proximity
Advisory, 1200'
feet below,
descending
190-02177-00 Rev. A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents