Garmin G1000 NXi Pilot's Manual page 367

C
hangIng The
If the navigation source is VOR or localizer, or OBS Mode has been enabled when using GPS, the Selected
Course is controlled using the CRS Knob.
Pressing the CWS Switch and hand-flying the aircraft does not change the Selected Course while in
Navigation Mode. The autopilot guides the aircraft back to the Selected Course (or GPS flight plan) when
the CWS Switch is released.
Navigation Source
190-02177-00 Rev. A
S C
eleCTeD oUrSe
GPS Navigation
Mode Active
GPS is Selected
Figure 7-13 Navigation Mode
Garmin G1000 NXi Pilot's Guide for the Cessna Nav III
AUTOMATIC FLIGHT CONTROL SYSTEM
Command Bars Indicate Right
Turn to Track GPS Course
353