Garmin G1000 NXi Pilot's Manual page 112

AUDIO PANEL AND CNS
Auto-tuning a COM frequency for a nearby airport from the PFD:
1) Select the Nearest Softkey on the PFD to open the Nearest Airports Window. A list of 25 nearest airport
identifiers and COM frequencies is displayed.
2) Turn the FMS Knob to scroll through the list and highlight the desired COM frequency.
3) Press the ENT Key to load the COM frequency into the COM Standby Frequency Field.
4) Press the Frequency Transfer Key to transfer the frequency to the COM Active Frequency Field.
AUTO-TUNING FROM THE MFD
Frequencies can be automatically loaded into the COM Frequency Box from pages in the NRST or WPT
page group by highlighting the frequency and pressing the ENT Key.
Auto-tuning a COM frequency from the WPT and NRST Pages:
1) From any page that the COM frequency can be auto-tuned, activate the cursor by pressing the FMS Knob or
selecting the appropriate softkey.
2) Turn the FMS Knob to place the cursor on the desired COM frequency.
3) Press the ENT Key to load the COM frequency into the standby field of the selected COM radio.
4) Press the Frequency Transfer Key on either PFD to transfer the frequency to the COM Active Frequency Field.
98
Figure 4-4 Nearest Airports Window (PFD)
Garmin G1000 NXi Pilot's Guide for the Cessna Nav III
Select the Nearest Softkey to Open
the Nearest Airports Window
190-02177-00 Rev. A