FLIGHT MANAGEMENT
ADDING PROCEDURES TO A STORED FLIGHT PLAN
The system allows the pilot to insert pre-defined instrument procedures from the navigation database into a
flight plan. The procedures are designed to facilitate routing of traffic leaving an airport (departure), arriving at
an airport (arrival), and landing at an airport (approach). See the procedures section for more details.
Softkeys
Load Departure -
Load Arrival -
Load Approach -
Activate Flight Plan
DEPARTURE (DP)
A Departure Procedure (DP) is loaded at the departure airport in the flight plan. Only one departure can
be loaded at a time in a flight plan. The route is defined by selection of a departure, the transition waypoints,
and a runway.
Selected
Departure
Preview of
Selected
Departure
190
Figure 5-55 Stored Flight Plan Page
Figure 5-56 Departure Loading Page - Selecting the Departure
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
Flight Plan Name
Flight Plan Waypoint
List
Departure Airport
Departures Available at
KMKC
Departure Waypoint
Sequence
190-02177-00 Rev. A