Loading a departure procedure into a stored flight plan:
1) Select a stored flight plan from the Flight Plan Catalog Page.
2) Select the Edit Softkey; or press the MENU Key, select 'Edit Flight Plan', and press the ENT Key. The Stored
Flight Plan Page is displayed.
3) Select the LD DP Softkey; or press the MENU Key, select "Load Departure", and press the ENT Key. The
Departure Loading Page is displayed.
4) Select a departure. Press the ENT Key.
5) Select a runway served by the selected departure, if required. Press the ENT Key.
6) Select a transition for the selected departure. Press the ENT Key.
7) Press the ENT Key to load the selected departure procedure.
Selected
Departure
Preview of
Selected
Departure
Selected
Departure End
Point
190-02177-00 Rev. A
Figure 5-57 Departure Loading Page - Selecting Transition
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
FLIGHT MANAGEMENT
Departure Airport
Selected Runway
Selected Transition
Departure Transition
Points Available
191