Garmin G1000 NXi Pilot's Manual page 271

Boundary
of Regional
NEXRAD Data
No radar coverage
within coverage
boundary
Regional
NEXRAD
Weather Product
enabled
The FIS-B NEXRAD weather product may be displayed for a region around the GBT (higher resolution,
updated more frequently) or for across the continental United States (lower resolution, updated less
frequently). A combined version of both weather products is also available for display on the same map.
When the combined NEXRAD is selected, regional NEXRAD takes display precedence where data is available,
and continental US NEXRAD is displayed outside of the regional NEXRAD coverage area.
Displaying the NEXRAD weather product on the Weather Data Link (FIS-B) Page:
1) Select the Weather Data Link (FIS-B) Page.
2) Select the NEXRAD Softkey. Each selection cycles though a coverage option as the softkey name changes (US,
RGNL, or US/RGNL.
Or :
1) Press the MENU Key.
2) Turn the FMS Knob to highlight 'Weather Setup' and press the ENT Key.
3) To enable/disable the display of NEXRAD information for the continental United States, turn the small FMS
Knob to highlight the NEXRAD On/Off field.
a) Turn the small FMS Knob to highlight 'On' to enable the display of NEXRAD for the continental United
States or 'Off' to disable.
b) Press the ENT Key.
190-02177-00 Rev. A
Figure 6-11 Regional NEXRAD Weather Product on the Weather Data Link (FIS-B) Page
Garmin G1000 NXi Pilot's Guide for the Cessna Nav III
HAZARD AVOIDANCE
Regional
NEXRAD
Weather Product
Icon and Age
257