Garmin G1000 NXi Pilot's Manual page 135

The symbols used in the PFD status bar are:
Symbol Description
Active Leg
Direct-to
Right Procedure Turn
Left Procedure Turn
Right Holding Pattern
The Navigation Data Bar located at the top of the MFD contains four data fields, each displaying one of the
following items:
BRG Bearing
DEST Destination Airport Identifier
DIS Distance
DTG
Distance to Go
DTK Desired Track
END
Endurance
ESA
Enroute Safe Altitude
ETA
Estimated Time of Arrival
ETE Estimated Time Enroute
FLT Flight Timer
The navigation information displayed in the four data fields can be selected on the MFD Data Bar Fields Box
on the Aux-System Setup 1 Page. The default selections (in order left to right) are GS, DTK, TRK, and ETE.
Changing a field in the MFD Navigation Data Bar:
1) Select the Aux - System Setup 1 Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the desired field number in the MFD Data Bar Fields Box.
4) Turn the small FMS Knob to display and scroll through the data options list to select the desired data.
5) Press the ENT Key. Selecting the Defaults Softkey returns all fields to the default setting.
190-02177-00 Rev. A
Figure 5-4 MFD Navigation Data Bar
Garmin G1000 NXi Pilot's Guide for Cessna Nav III
FLIGHT MANAGEMENT
Symbol Description
Left Holding Pattern
Vector to Final
Right DME Arc/Radius to Fix Leg
Left DME Arc/Radius to Fix Leg
FOB Fuel on Board
FOD Fuel over Destination
GS Ground Speed
MSA Minimum Safe Altitude
TAS True Airspeed
TKE
Track Angle Error
TRK
Track
VSR
Vertical Speed Required
XTK Cross-Track Error
121