Managing Lines
The version command displays the software versions running on the card:
PXM1E_SJ.1.21.AUSMB8.a > version
***** Cisco Systems Inc. AXIS AUSM-8T1/E1 Card *****
VxWorks (for CISCO) version 5.1.1-R3000.
Kernel: WIND version 2.4.
Made on Mon Jul 1 23:25:34 PDT 2002.
Boot line:
PXM1E_SJ.1.21.AUSMB8.a >
Managing Lines
Chapter 2, "Provisioning Communications Links,"
card lines. The following sections provide procedures for doing the following:
•
•
•
•
This section provides procedures for some of the most common line management commands. For a
Note
complete list of line management commands, refer to
Reference."
Displaying a List of Lines
To display a list of lines on the current AUSM card, enter the dsplns command as follows:
PXM1E_SJ.1.21.AUSMB8.a > dsplns
Line
----
21.1
21.2
21.3
21.4
21.5
21.6
21.7
21.8
LineNumOfValidEntries: 8
PXM1E_SJ.1.21.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
3-4
Firmware Version
= 020.000.001.000-D
Backup Boot version = AU8_BT_1.0.02
AUSM8p Xilinx file = ausm8pXilinx.h
Displaying a List of Lines
Display the Configuration for a Single Line
Bringing Down a Line
Managing Line Alarms
Conn
Type
Type
----- ------------ ------ -------- ------------- -------- ----- -----
RJ-48 dsx1ESF
RJ-48 dsx1ESF
RJ-48 dsx1ESF
RJ-48 dsx1ESF
RJ-48 dsx1ESF
RJ-48 dsx1ESF
RJ-48 dsx1ESF
RJ-48 dsx1ESF
describes how to bring up (add) and modify AUSM
Table 4-3
Status/Coding
Length
Ena/dsx1B8ZS 0-131 ft
Dis/dsx1B8ZS 0-131 ft
Dis/dsx1B8ZS 0-131 ft
Dis/dsx1B8ZS 0-131 ft
Dis/dsx1B8ZS 0-131 ft
Dis/dsx1B8ZS 0-131 ft
Dis/dsx1B8ZS 0-131 ft
Mod/dsx1B8ZS 0-131 ft
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Chapter 3
AUSM Card Management
in
Chapter 4, "AUSM Command
XmtClock Alarm Stats
Source
Alarm
LocalTim
Yes
Yes
LocalTim
LocalTim
LocalTim
LocalTim
LocalTim
LocalTim
LoopTimi
No
No