Managing The Switch; Displaying Information About The Installed Hardware Modules - Cisco Nexus 9504 Hardware Installation Manual

Managing the Switch

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Displaying Information About the Installed Hardware Modules

You can display information about the switch hardware and the hardware modules that are installed in the
switch chassis by using the show hardware command.
switch# show hardware
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_seri
es_home.html
Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.
Software
...
Displaying Information About the Installed Hardware Modules, on page 45
Displaying the Hardware Inventory for a Switch, on page 49
Displaying Fabric Utilization Information, on page 49
Displaying the Backplane and Serial Number Information, on page 52
Displaying Environmental Information for the Switch, on page 53
Displaying the Current State of a Module, on page 54
Displaying Temperatures for a Module, on page 56
Connecting to a Module, on page 58
Saving the Module Configuration, on page 58
Shutting Down or Starting Up a Module, on page 59
Purging a Nonfunctioning Module from the Running Configuration, on page 60
Displaying Power Usage Information, on page 60
Reload a Module, on page 61
Rebooting a Switch, on page 62
Overview of Supervisor Modules, on page 63
Overview of Power Modes, on page 64
Overview of Fan Trays, on page 69
C H A P T E R
Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide
5
45