Dspilmi - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

dspilmi

dspilmi
Display ILMI
Use the dspilmi command to view the Interim Local Management Interface (ILMI) configuration for an
ATM port or IMA group.
Syntax
dspilmi <port_num>
Syntax Description
port_num
Related Commands
cnfilmi, dspilmicnt
Attributes
Log: No
Example
Display the ILMI configuration for port 1 on the AUSM.
PXM1E_SJ.1.1.AUSMB8.a > dspilmi 1
PortNum:
Signalling:
SignallingVPI:
SignallingVCI:
ILMITrap:
ILMI-Min-Trap-Interval(secs):
KeepAlivePolling:
ErrorThreshold:
EventThreshold:
PollingInterval(secs):
MinimumEnquiryInterval(secs):
AddressRegistration:
PXM1E_SJ.1.1.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-140
Enter the port number you want to display. To display a list of configured ports,
enter the dspports command.
State: Any Privilege: Any User
1
No Signalling
0
16
Disable
1
Disable
3
4
30
10
Disable
Chapter 4 AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002