Dspsarcnt - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

dspsarcnt

dspsarcnt
Display SAR Counters
Use the dspsarcnt command to display the Segmentation And Reassembly (SAR) counter statistics for
a specific connection.
Syntax
dspsarcnt <port_num.vpi.vci | channel_num>
Syntax Description
port_num
vpi
vci
channel_num
Related Commands
clrsarcnt, clrsarcnts, dspsarcnts
Attributes
Log: No
Example
Display the SAR counters for channel 18 on the current AUSM card.
PXM1E_SJ.1.13.AUSMB8.a > dspsarcnt 18
Total Cells:
Total CellsCLP:
Total CellsAIS:
Total CellsFERF:
Total CellsEnd2EndLpBk: 0
Total CellsSegmentLpBk: 0
RcvCellsDiscOAM:
PXM1E_SJ.1.13.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-168
Enter the port number for the connection you want to display. To display a list
of configured ports, enter the dspports command. To display a complete list of
connections, enter the dspcons command.
Enter the VPI of the connection you want to display. The VPI for a connection
is displayed in the dspcons command report.
Enter the VCI of the connection you want to display. The VCI for a connection
is displayed in the dspcons command report.
Enter the channel number of the connection you want to display. The dspcons
command displays connection channel numbers in the LCN column.
State: Any Privilege: Any User
SarShelfNum:
SarSlotNum:
SarChanNum:
Tx
---------------
975174190
0
28
0
Chapter 4 AUSM Command Reference
1
13
18
Rx
---------------
0
0
0
0
0
0
0
Release 3, Part Number 78-14254-01 Rev. A0, October 2002