Dspport - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

Chapter 4 AUSM Command Reference

dspport

Display Port
Use the dspport command to display status and configuration data for a specific port.
Syntax
dspport <port number>
Syntax Description
port number
Related Commands
addport, delport, dspports
Attributes
Log: No
Example
The first example shows the display for ATM port 8.
PXM1E_SJ.1.1.AUSMB8.a > dspport 8
LogicalPortNumber:
Port Enable:
Port State:
PortType:
PhysicalPortNumber:
CellFraming:
CellScramble:
Plpp Loopback:
Single-bit error correction:
PXM1E_SJ.1.1.AUSMB8.a >
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Enter the port number you want to display. For a list of the configured ports,
enter the dspports command.
State: Any
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Any User
8
UP
Line alarm
UNI
8
ATM
No Scramble
No Loopback
Disabled
dspport
4-159