Chapter 4
AUSM Command Reference
clrimagrpcnt
Clear IMA Group Counter
Use the clrimagrpcnt command to clear the failure count for a specific IMA group on the current AUSM
card.
Syntax
clrimagrpcnt <group_num>
Syntax Description
group_num
Related Commands
clrimalncnt, dspimagrp, dspimagrpcnt, dspimagrps, dspimainfo, dspimalncnt
Attributes
Log: No
Example
Clear the failure count for IMA group 1 on the current card.
PXM1E_SJ.1.1.AUSMB8.a > clrimagrpcnt 1
PXM1E_SJ.1.1.AUSMB8.a >
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Enter the number for the IMA group you want to modify. Use the dspimagrps
command to display the configured IMA groups.
State: Active
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Group 1
clrimagrpcnt
4-39