Dspcon - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

dspcon

dspcon
Display Connection
Use the dspcon command to display configuration and operation data for connection.
Syntax
dspcon <port_num.vpi.vci>
Syntax Description
port_num
vpi
vci
Related Commands
addcon, cnfcon, delcon, dncon, dspcons, rrtcon, tstcon, upcon
Attributes
Log: No
Example
Display the connection on port 1, VPI/VCI 100/100.
PXM1E_SJ.1.4.AUSMB8.a > dspcon 1.100.100
-------------------------------------------
ChanNum:
AdmnState: Up
---------- ---------- ---------- ----------
PORT-ALARM CTRLR-ABIT E-AIS/RDI
---------- ---------- ---------- ----------
-------------------------------------------
ChanNum:
RowStatus:
ConnAdminStatus:
ConnectionType:
ServiceType:
ChanSvcFlag:
PortNum:
VPI:
VCI (For VCC):
Local VPId(for VPC):
EgressQNum:
IngressQDepth(cells):
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-132
Enter the port number for the connection you want to display. To display a list
of configured ports, enter the dspports command. To display a complete list of
connections, enter the dspcons command.
Enter the VPI of the connection you want to display. The VPI for a connection
is displayed in the dspcons command report.
Enter the VCI of the connection you want to display. The VCI for a connection
is displayed in the dspcons command report.
State: Any
16 RowStatus: Add
ChanState: Failed
YES YES
Privilege: Any User
I-AIS/RDI
NO NO
16
Add
Up
VCC
CBR1
PNNI
1
100
100
0
1
1000
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Chapter 4 AUSM Command Reference