Clrsarcnt - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

Chapter 4 AUSM Command Reference

clrsarcnt

Clear SAR Counters
Use the clrsarcnt command to clear the Segmentation And Reassembly (SAR) counter statistics for a
specific connection.
Syntax
clrsarcnt <port_num.vpi.vci>
Syntax Description
port_num
vpi
vci
Related Commands
clrsarcnts, dspsarcnt, dspsarcnts
Attributes
Log: No
Example
Clear the SAR counters for the connection on port 1 with VPI/VCI 100/100.
PXM1E_SJ.1.13.AUSMB8.a > clrsarcnt 1 100 100
PXM1E_SJ.1.13.AUSMB8.a >
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Enter the port number for the connection you want to modify. To display a list
of configured ports, enter the dspports command. To display a complete list of
connections, enter the dspcons command.
Enter the VPI of the connection you want to display. The VPI for a connection
is displayed in the dspcons command report.
Enter the VCI of the connection you want to modify. The VCI for a connection
is displayed in the dspcons command report.
State: Any
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Group 5
clrsarcnt
4-45