Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference page 162

cnfupcubr
Related Commands
dspcon, dspcons
Attributes
Log: Yes
Example
Configure the usage parameter control (UPC) parameters for UBR on the current AUSM.
s1.1.12.AUSMB8.a > cnfupcubr 2.1.7 2 4528 250000 50 2
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-88
State: Active Privilege: Group 2
Chapter 4 AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002