Dspchan - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

dspchan

dspchan
Display Connection using Channel Number
Use the dspchan command to display configuration and operation data for connection. This command
produces the same report as the dspcon command, but you can specify the connection using the channel
number instead of using the port, VPI, and VCI numbers.
Syntax
dspchan <channel>
Syntax Description
channel
Related Commands
addcon, delcon, dncon, dspchans, dspcons, tstcon, upcon
Attributes
Log: No
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-124
Specify the channel for the connection to be displayed. Channel numbers are
displayed in the LCN column of dspcons and dspchans command reports.
State: Any Privilege: Any User
Chapter 4 AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002