Table of Contents
Advertisement
Chapter 4
AUSM Command Reference
MCR
PctUtil
Related Commands
addcon, delcon, dspcon, dspcons
Attributes
Log: Yes
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Minimum cell rate. The range depends on the speed of the logical port:
•
T1 = 10 to 3622
E1 = 10 to 4528
•
•
Clear E1 = 10 to 4830
•
IMA T1 = 10 to (3591 * number_of_lines)
IMA E1 = 10 to (4490 * number_of_lines)
•
IMA clear E1 = 10 to (4789 * number_of_lines)
•
An IMA group's range depends on the number of links in the group.
Note
Multiply the single line rate by the number of lines.
Percent utilization. Range is 1 to 100 percent.
State: Active
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Group 2
cnfcon
4-59
Advertisement
Table of Contents
