Chapter 4
AUSM Command Reference
cnfcdprtntype
Configure Card Partition Type
Use the cnfcdprtntype to select the partition type for the current card.
Syntax
cnfcdprtntype <type>
Syntax Description
type
Related Commands
dspcdprtntype
Attributes
Log: Yes
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Partition type:
•
No partition = 1
•
Controller based = 2
Port controller based = 3
•
State: Active
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Group 2
cnfcdprtntype
4-53